Zero 88 SIRIUS 500, Руководство оператора

Страница: 76 / 119

Modifying the Set-Up
1 Move down to Modify Set-Up and
press the ] key. A warning
appears to the effect that memory
data may be lost, damaged or
become unusable if fixture data is
changed.
*THIS OPERATION MAY*
*DAMAGE MEMORY DATA*
Press ] to continue
or [ to abort
Press the [ key to abort or the]
key to continue. The Fixture
Assignment window is opened.
2 Press the channel flash buttons to
select all desk channels to be used
to control a particular type of
fixture. These are highlighted in
the list as the buttons are pressed.
The red light in the buttons also
come on.
3 Press the ] key to open a window
containing a list of fixture
manufacturers.
4 Use the { and } keys to select the
required manufacturer.
Mod Set-Up: Select {}
HIGH END SYSTEM
Press Program to
View Fixture Types
Once selected, press the
PROGRAM button or the ] key to
open a window showing the
available fixture types for that
manufacturer. (See Figure 5-8 for
monitor display.)
Mod Set-Up: Select {}
HIGH END SYSTEMS
Cyberlight Mode 3
Program to SAVE
Use the { and } keys to select the
required fixture type, and press the
PROGRAM button to assign the
fixture type to the desk channel(s).
The fixture type on the list changes
to the type just selected, and all
the DMX addresses change to NA
(not assigned).
Modify Set-Up:
Select Fixture No
Press ] to Allocate
Or [ to Return
5 Repeat this process until all the
right fixtures have been allocated
to the right desk channels, and
press the [ key to return to the
Modify Set-Up window.
/p5-9/3
NOTE
Unassiging Fixtures
Follow steps 1 to 3 opposite then select
<Clear> from the fixture manufactures list
and press Program. The selected desk
channels will be cleared and displayed as
Not Assigned in the Fixture Assignment
Window
n
Figure 5-8: Fixture Type
5
SetUp: Desk SetUp
7364000/p5-9/3
5 - 9