Zero 88 SIRIUS 500, Руководство оператора, Страница: 62 / 119

Inserting Memories
1 Select the Insert Memory/Cue
buttons.
2 Click on the Brightness track
(Track 1) in Cue 1.
3 Select a memory to add onto the
track from the list in the Select
Brightness Memory window, and
click on Insert.
The memory is added to the
Brightness track for a default
duration of 5 seconds. The time
track shows real time in seconds.
4 Now add a second memory in
Cue 3 (Memory 2). (Click on the
brightness track in Cue 3 and
select a memory.) See Figure 4-7.
The first and second memories are
joined by a gray bar, indicating that
the output from the first memory
will be held, even through cues,
until the second memory is
triggered. ’THE CueLine’ will
trigger a memory, and its output is
then held until another
memory/event is triggered.
5 Extra memories can now be added
in the same cue, or in different
cues. To add an extra memory
before an existing memory, click
on the left-hand side, or on the
right-hand side for a memory after.
Removing a Memory
1 Select the Remove button and
click on the memory.
The memory is removed without
any warning being displayed.
NOTE
Turning Off
To turn off a Brightness Track (stop all
brightness output), insert a blackout.
/p4-5/1
n
Figure 4-7: Inserting Brightness Memories
n
Figure 4-8: Selected Brightness Memory
n
Figure 4-9: Selected Cross Fade
4
CueLine Programming
7364000/p4-5/1
4 - 5