Zennio GetFace IP
Tecnical Support
53
3.2.4
HARDWARE
The following items can be configured in the
Hardware
section:
3.2.4.1
AUDIO
Figure 46
Audio.
Master Volume
: audio volume level for both calls and signals (ringtones).
Adaptive Volume
: if enabled, a
Maximum Gain
and a
Sensitivity
Threshold
can be parameterised. The latter defines the volume level that will
trigger the adaptive volume increase. On the other hand, even if this option is
left disabled, the
Current Noise Level
and the
Current Adaptive Gain
can
be consulted here.
Phone Call Volume
: defines the volume of the ringtones as well as of the
call-progress tones, i.e., of the dial and busy-line tones.
Signalling Volume
: sets the volume of the key beeps, the warning tones and
the switch-activation tone, as well as the user sounds to be played back.
