Zennio GetFace IP ZVP-WOCAM, Руководство пользователя

Страница: 29 / 62

Zennio GetFace IP
http://www.zennio.com Tecnical Support : http://support.zennio.com
29
3.1.6 BUTTONS MODULE CALL CONFIGURATION
The section Hardware

Buttons defines the buttons and the dwelling linked to each
one of them, in case a buttons module has been attached to the system (reference
ZVP-NAME5).
Figura 18 Buttons.
Basic Settings :
Button Function During Call : configures the function of the quick dial button
during a call. This only applies to the button the call was started with. It is
recommended to leave this button non-functional during calls, otherwise the
calls may be finished by mistake.
Answer Incoming Call by Button : allows answering the incoming call by the
selected quick dial button. The function can be disabled by selecting None.
Restore Network Settings By Buttons : this option allows restoring the
network default settings through a quick dial buttons sequence (see section 3
for more information).
In Quick Dial Buttons will appear all available direct dial buttons, depending on the
number of five-button modules connected (up to 29 modules), together with the button
incorporated in the video intercom. Each button can be configured to call one or more
of the users configured in the Directory (see section 3.1.3.1 for more information).
Clicking on the icon simulates a click on the button and a call to check that it has
been correctly configured.