Zennio GetFace IP
Tecnical Support
12
3.1
GETFACE IP BASIC SETTINGS
The most important fields to be configured so the video intercom can interface with Z41
COM are explained next. Those to be modified from the default configuration are, in
short, the following:
Phone Number (ID)
:
identifier of the video intercom (if intending to link it to a
specific box in Z41 COM).
services
security settings. Up to 5 different configurations
available.
Users Phone Number
: should contain the IP address of each Z41 COM.
How these fields should be configured is explained in the following sections.
Notes
:
Options not mentioned in the present document should be left with their
default configuration.
Options showing a prohibition icon when the mouse pointer is placed over
them are locked due to license constraints.
It is possible to return the device to its default settings ('hard reset'). To do
this, there are two options:
Pressing the reset button of the main unit for 30 seconds.
In the web interface, in the section
System
Maintenance
Configuration
Reset Configuration to Default State
.
3.1.1
NETWORK CONFIGURATION (SYSTEM)
The Network section allows using a DHCP server or setting up a static network
configuration.
Note
:
there are cases where the application of a static IP is mandatory
.
In single-family homes, with the video intercom connected directly to the
indoor unit. It is important to ensure that their network mask is the same while
their IPs are different (but belonging to the same range)
.
