Zennio GetFace IP
Tecnical Support
14
Intercom identity
:
configuration parameters that define the video intercom
profile (see section 3.1.3.1):
Display name
:
identification name for the video intercom, which is also
shown at the start page of the web interface.
Phone Number (ID)
:
alphanumerical identifier for the video intercom. This
value must match the
Intercom ID
parameter (in ETS) of the particular box
of Z41 COM where the video intercom is desired to be linked to. This field
is mandatory if the outdoor and indoor unit are in different networks. It is
also required when several video intercoms must be distinguished in
different boxes in the same Z41 COM.
Notes
:
Characters > and < are not allowed in the
Display name
field.
The
Phone number (ID)
field must be alphanumeric and no longer than 10
characters. Characters like @ or · are not allowed. However, basic
punctuation marks are allowed
.
Figure 6
SIP.
CALLS
The
Calls
tab allows setting up the parameters related to the video-calls.
First of all, under
General Settings
it is possible to set a
Call Time Limit
, which sets
the maximum duration of the call. After this time, the call is finished automatically. The
end of this call will be warned by GetFace IP by beeping 10 seconds in advance. In
such case, the call can be extended by simply pressing on any button from the touch
