Zennio GetFace IP
Tecnical Support
40
Important
:
in the case of loss or theft of a mobile device with access data, proceed as
follows:
Delete the Auth ID (see section 3.1.10.1) to prevent access.
Re-generate the primary key (optionally) to avoid misuse of the encryption
key stored in the mobile device.
Pairing Mode Settings
:
Pairing PIN validity
: set the authorisation PIN validity for user mobile device
pairing with the intercom.
Encryption key for pairing
: shows the actual key and allows to
re-generate it.
3.1.10.3
HARDWARE OPTIONS
On the tab
Hardware
Extenders
will be more options for the module configuration.
Figure 30
Bluetooth Module
Hardware Configuration
Module name
: sets the module name for logging events from the Bluetooth
module.
Door
: sets the reader direction (Door Entry, Door Exit).
Associated switch
: sets the Door Lock Switch or the number of the switch to
be activated after user authentication via this module.
Signal range
: sets the maximum signal range, i.e. the distance within which
the Bluetooth module can communicate with the mobile phone.
