Zennio GetFace IP
Tecnical Support
24
Security
: the output works in inverted mode but a security relay module
has been installed and therefore a specific pulse sequence is necessary
for the door opening (this requires the ZVP-ACSR module).
Time Profile
to be applied to the switch. It can be selected one of the pre-
sets (see section 3.2.2.1) or a specific one.
Activation Codes
: codes that will allow activation of the switches by typing
them into the keypad (only for the ZVP-KEYPAD or ZVP-TOUCHD modules).
Code activation time profiles can also be applied (see section 3.2.2.1).
Distinguish on/off codes
, in case of a bistable switch.
State Signalling
: sets the type of the acoustic feedback to be performed on
the activation of the relay. Either a short or long beep can be configured.
Synchronisation
: enables switch synchronisation so that, when one of the
switches is activated and after a parameterised delay, another switch gets
activated as well.
