Zennio GetFace IP ZVP-WOCAM, Руководство пользователя

Страница: 18 / 62

Zennio GetFace IP
http://www.zennio.com Tecnical Support : http://support.zennio.com
18
please refer to section 3.2.3 ) . It is also necessary to parameterise the System API
1
,
the Switch API and the Camera API .
To that end, the aforementioned parameters are configured as detailed below, under
Services

HTTP API

Services .
System API :
“Secure (TLS)” with “Basic ”
authentication.
Switch API :
“Secure (TLS)” with “Digest ”
authentication.
Camera API :
“Unsecure (TCP)”. If a camera preview is required, the
authentication should be set to
“None”.
Figure 11 HTTP API Services.
ACCOUNTS
The Account n tabs allow setting up user configuration profiles that restrict certain
actions depending on the username and password. Up to five accounts are possible,
each with a username and a password and with different access privileges, either
monitor or control privileges. These accounts allow a higher security level, as
authentication with Z41 COM is required.
1
API: Application Programming Interface.