Zeiss Humphrey II-i series, Руководство пользователя

Страница: 226 / 580

File Functions
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
10-16
If you select FLOPPY, a directory of all tests on the floppy disk will be printed in Name order. If you
select PARTIAL, you can then specify either HARD DRIVE, FLOPPY, or a USB storage device as the
Source, and either Name or Date as the order. The keyboard and the file directory screen will be
displayed to allow you to choose the tests to include in the partial directory. Directories cannot be
printed in Patient order. To print a complete chronological (Date) directory, choose PARTIAL and
then press the SELECT ALL button on the file directory screen before pressing PROCEED.
Note: You may cancel printing at any time by selecting CANCEL from the print progress pop-up
window.
To Convert Tests to Older Database Formats:
This function converts one or more tests in a format that can be read by all HFA II-
i
system software
versions prior to version 5.0, and HFA II system software Ver. A6 or later. CONVERT TESTS is
designed to work only with an empty floppy disk and is intended to allow sharing HFA tests
between practices.
1. Start at the File Functions screen. Select CONVERT TESTS.
2. Connect a USB floppy disk drive to a USB port on the HFA II-
i
.
3. Insert an empty floppy disk in the USB floppy disk drive.
4. Select the test(s) you want to convert or SELECT ALL to convert all tests saved on the Hard Drive.
5. Select PROCEED to begin converting and exporting tests.
6. The selected tests will be copied to the floppy disk.
CAUTION: CONVERT TESTS is not designed for routinely sharing tests between HFAs
in the same practice because not all the data items in the database are saved during
the CONVERT TESTS function. Do not use CONVERT TESTS to copy tests to other HFA
instruments running system software version 5.x. Use COPY TESTS instead.
To Duplicate Floppy Disks:
1. Start at the File Functions screen. Select DISK UTILITIES>DUPLICATE FLOPPY.
2. Connect a USB floppy disk drive to a USB port on the HFA II-
i
.
3. Put the Source disk (the disk you want to copy) in the USB floppy disk drive.
4. Select OK to proceed or CANCEL to return to the File Functions menu. If you select OK, the
next screen displays, “Reading Source Disk”.
5. When instructed to do so, remove the Source disk and put the Destination disk in the USB
floppy disk drive. Note that this procedure will erase all old data from the Destination floppy
disk prior to copying the information from the Source disk onto it. Press OK to proceed, or
CANCEL to abort the procedure and leave the Destination floppy unchanged. If you select OK,
the next screen displays, “Writing to Destination Disk”.
CAUTION: Remember to make sure that the Destination disk has NO valuable
information on it before you decide to duplicate information onto it. Everything on
the Destination disk will be replaced with all of the information on the Source disk
when you use the DUPLICATE FLOPPY function.