manualshive.com logo in svg

Zeiss Humphrey II-i series, Руководство пользователя

Операторы зрительного анализа Zeiss Humphrey II-i series могут легко настроить свои устройства, скачав руководство по эксплуатации бесплатно со страницы нашего веб-сайта. Это руководство поможет пользователям успешно использовать свои устройства и получить максимальную пользу от них. Скачать можно по ссылке manualshive.com.

Поделиться
Скачать
background image

Humphrey Field Analyzer II-

i

 series User Manual

2660021145640 A

Introduction & Instrument Setup

1-27

3. Plug in the purple PS/2 connector on the PS/2 splitter adapter into the purple PS/2 cable 

connector from the keyboard, and the green PS/2 connector on the PS/2 splitter adapter into 
the green PS/2 cable connector from the keyboard.

4. Power on the HFA II-

i

. The HFA will recognize the external keyboard automatically.

While many standard PC-type keyboards (must have PS/2-style plug) may be plugged into the HFA 
II-

i

 and should work, Carl Zeiss Meditec can only guarantee full compatibility if you use the factory 

keyboard. Please refer to 

“Using the External Keyboard,” on page 2-6

 for further details regarding 

keyboard use.

Removable USB Storage Devices and USB Floppy Drives

The HFA II-

i

 has five USB ports for connecting removable USB storage devices (USB flash drives 

and/or USB hard drives) and USB floppy drives. The side of the HFA II-

i

 has two USB ports (see 

Figure 1.4

), and the rear has three USB ports on the cable connections panel (see 

Figure 1.8

). All 

removable USB storage devices and USB floppy disk drives are hot-swappable—they can be 
connected and removed without needing to restart the HFA II-

i

. Up to five USB storage devices can 

be connected, but only two can be available to use. When you insert a USB storage device, the 
device is automatically connected and its device name appears in a button or drop-down list for 
selection. If two or more USB storage devices are already connected to the HFA II-

i

, you must 

remove all of them and then insert the new one for it to be available for use.

CAUTION: Only remove a USB storage device or USB floppy drive when it is not 
reading or writing data. Wait for the HFA progress bar to complete and/or the 
device’s activity light to cease. Otherwise, you may damage or corrupt data on your 
USB device.

CAUTION: Make sure your USB devices are secured against malware/viruses. Patient 
data on USB devices can become corrupted when inserting into computers for 
backup or transfer. The use of anti-virus software on computers is recommended and 
is the responsibility of the user.

CAUTION: To protect your HFA data from unauthorized access, use dedicated USB 
devices for storage of HFA data. Do not use these USB devices for any other data or 
application. HFA data is not encrypted.

CAUTION: Health care providers have responsibility for the protection of patient 
health information (PHI), both hardcopy and electronic. To protect patient 
confidentiality of your electronic HFA data, the use of encryption is recommended 
and is the responsibility of the user.

Note: The HFA is only compatible with USB storage devices formatted in FAT (FAT16) or FAT32. NTFS 
or exFAT (FAT64) cannot be used and will report an “Unrecognized format” error. Also, the HFA can 
only see and access the first partition of the USB storage device.

Note: Some USB hard drives may require connection to two USB ports or their own external power 
supply to work correctly.

Note: An optional USB floppy disk drive should only be used for backwards compatibility. It is highly 
recommended to use USB storage devices instead of floppy disks. Floppy disks may not be available 
in the near future.

Содержание Humphrey II-i series





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Humphrey II-i series

Hammond Skx PRO Reference Manual preview
Skx PRO
Бренд: Hammond Страницы: 754
Yamaha Mark III User Manual preview
Mark III
Бренд: Yamaha Страницы: 83
Yamaha Mark III Operating Manual preview
Mark III
Бренд: Yamaha Страницы: 63
Eaton Eclipse Series Installation And Operation Manual preview
Eclipse Series
Бренд: Eaton Страницы: 53
Oceanic GEO Operating Manual preview
GEO
Бренд: Oceanic Страницы: 75
D-tect Systems rad-DX Installation And Operating Instructions Manual preview
rad-DX
Бренд: D-tect Systems Страницы: 19
Sanmenxia ZX400 Operation Manual preview
ZX400
Бренд: Sanmenxia Страницы: 17
SANKO SM-1100 Instruction Manual preview
SM-1100
Бренд: SANKO Страницы: 25
Samson 2162 Parts And Technical Service Manual preview
2162
Бренд: Samson Страницы: 2
Xylem YSI Pro1030 User Manual preview
YSI Pro1030
Бренд: Xylem Страницы: 19
Keysight M3100A PXIe User Manual preview
M3100A PXIe
Бренд: Keysight Страницы: 92
ADA INSTRUMENTS A00108 Operating Manual preview
A00108
Бренд: ADA INSTRUMENTS Страницы: 27
WATERGUARD V21I Installation Manual preview
V21I
Бренд: WATERGUARD Страницы: 2
Teledyne 7300A Operating Instructions Manual preview
7300A
Бренд: Teledyne Страницы: 85
Ntron Microx Online User Instruction Manual preview
Microx Online
Бренд: Ntron Страницы: 29
XS Scuba VX200-N-VI Series Service Manual preview
VX200-N-VI Series
Бренд: XS Scuba Страницы: 34
PANCONTROL PAN 118 Manual preview
PAN 118
Бренд: PANCONTROL Страницы: 157
mru NOVAplus biogas User Manual preview
NOVAplus biogas
Бренд: mru Страницы: 78

Бренды по названию

Популярные бренды

Загрузить еще бренды