Zeiss Humphrey II-i series, Руководство пользователя

Страница: 224 / 580

File Functions
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
10-14
You can print test results by pressing the
PRINT FUNCTIONS
icon. You can view patient data by
pressing the PATIENT DATA button. Patient data also can be changed for the test you are viewing on
the same screen. The
PATIENT DATA
icon is ghosted during the View Test operation. Test parameters
that are in effect during the test may be seen by pressing the DISPLAY STATUS button.
To Change Patient Data:
When changing patient data associated with a single test, some of the information contained in the
Patient Data 1 or Patient Data 2 screens can be altered, including the test date. This can be a useful
feature, for example, if the internal calendar was incorrect at the time of testing. Single test data
may also be changed by using View Test, as described above. When changing patient data
associated with all tests for a given patient, you may change the Patient ID, Patient Name, and Date
of Birth.
Note: The Change Patient Data function should only be used if you do not have HFA-NET Pro or
DICOM Gateway software licensed on your HFA II-
i for use with EMR/PMS/DICOM software. This is
because if the Patient ID, Patient Name, or Date of Birth is changed on the HFA, a new patient could
be created on the EMR/PMS/DICOM system. It is recommended to only change the Patient ID,
Patient Name, or Date of Birth on the EMR/PMS/DICOM, and not on the HFA, to avoid possible
patient conflicts.
1
To change data on all of a patient’s tests at one time, start at the
File Functions screen. Select CHANGE PATIENT DATA, then choose ALL
TESTS.
2
Select the desired Source (HARD DRIVE, FLOPPY, or USB storage
device). Press PROCEED.
3
Use the keyboard to locate the patient. Choose the patient from the
File Directory screen. Press PROCEED.