Zeiss Humphrey II-i series, Руководство пользователя

Страница: 500 / 580

Networking Reference
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
I-10
Figure I.10 FTP Folder Setup Screen 4
Select FTP SERVER IP ADDRESS. Enter the FTP server IP address.
5
Select USER NAME. Enter your user name for the FTP server.
6
Select PASSWORD. Enter your password for the FTP server.
7
Select FTP FOLDER. Enter the name of the folder on the FTP server where the data will transfer
to. This must be either an existing folder on the FTP server or one that your Network
Administrator has specifically created for your use. Once the folder is designated, its name and
location will appear in the Folder box, immediately below the FTP Folder button.
8
Once you have completed all of the entries, the screen will appear as is shown in Figure I.11 .
Use it to verify the accuracy of the entries that you made.
9
Select PROCEED. The instrument will attempt a test connection, using the data you have
entered. During this process, an alert will appear that says: “Test Connection in Progress.
Please Wait.”
10
If a problem occurs during this procedure, refer to “Network Troubleshooting Error Messages,”
on page I-31 for assistance.