Zeiss CONTURA, Руководство по эксплуатации

Страница: 49 / 158

Control unit and operation
61211-1310402 CONTURA
3-13
Direction Action Movement of the joystick, ram
and probe
Y axis +Y – Push the joystick to the rear.
The probe moves away from
the operator.
+Y
-Y – Pull the joystick to the front.
The probe moves towards the
operator.
-Y
NOTE
You may reverse the movement direction of the joysticks. This is advis-
able when operating the control console and performing probing from
behind the CMM.
To reverse the movement direction of the joystick, you need to press a
button on the control console. See operating instructions for the con-
trol console.
Left joystick
The left joystick is used to move the ram in the Z axis. When using a ro-
tary table, the rotary table can also be turned.
Direction Action Movement of the joystick, ram,
and rotary table
Z direction +Z – Push the joystick to the rear .
The ram moves upwards.
+Z
-Z – Pull the joystick to the front .
The ram moves downwards. -Z
Rotation direction of
the rotary table (op-
tional) 1. Press the button on the joystick
and keep it pressed.
2. Push the joystick to the left .
The rotary table turns clock-
wise.
1. Press the button on the joystick
and keep it pressed.
2. Push the joystick to the right .
The rotary table turns counter-
clockwise.