ZEISS
FIRST-TIME SET-UP
Axio Imager 2
Mounting the tube lens turret
36
430000-7544-001
01/2016
3.4
Mounting the tube lens turret
•
Use an AF 3 ball-headed screwdriver to loosen
clamping screw (Fig. 11/
3
) and remove the tube
1
) upward.
•
Unscrew the four fastening screws (Fig. 11/
2
),
remove coupler plate (Fig. 11/
4
) upward and
store it for future use.
•
Put tube lens turret (Fig. 11/
6
) onto stand
5
) and screw it down using the four
fastening screws (Fig. 11/
7
) supplied.
•
Unscrew the tube lens by hand from the tube
to be used (Fig. 11/
1
). Store it in the storage
box.
•
Insert tube (Fig. 11/
1
) without tube lens and
dovetail into the mount of the tube lens turret
(Fig. 11/
6
) and tighten clamping screw
3
).
3.5
Inserting the eyepieces and
auxiliary microscope
•
Remove both dust caps (Fig. 12/
1
) from the
binocular tube.
•
Remove both eyepieces (Fig. 12/
2
) from their
cases and insert them into the binocular tube as
far as they will go.
•
The auxiliary microscope (Fig. 12/
3
) can be
inserted into one of the eyepiece sockets of the
binocular tube in place of an eyepiece. It is used
to view the objective pupil and to center phase
and darkfield stops. These diaphragms and
stops can be focused using the adjustable eye
lens; the setting can then be locked by means
of the clamping screw.
Fig. 11
Mounting the tube lens turret
Fig. 12
Inserting eyepieces
