Axio Imager 2
OPERATION
ZEISS
Operating the motorized microscope via the touchscreen of the TFT display
01/2016
430000-7544-001
109
−
User
button:
When this button is pressed, the user
selection page will appear (Fig. 95).
A preconfigured user may be chosen on the
user selection page
. For the configuration
of a user, see Section 4.8.6.
−
Load Position
button:
When this button is pressed, the stage
travels to the load position. The load position
is approximately 10 mm below the operating
position. The load travel of the stage can be
interrupted using the
STOP
button (Fig. 96)
or any button on the stand base.
When the stage arrives in the load position,
the
Load Position
popup window (Fig. 97)
appears with the following control elements:
Stage returns to operating
position.
While this button is pressed,
the stage travels to the
operating position (up to the
upper stage stop).
While this button is pressed,
the stage moves down (to
the lower stage stop).
When this button is pressed,
the current focus position is
set as the operating
position.
Caution! If the set operating position is
below the current focus position, the
focusing drive will move downward
when the
button is pressed.
Fig. 95
User selection page
Fig. 96
STOP button
Fig. 97
Stage in load position
