DOC-USR-0094-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
44
7.4
Decoding a .ts File
(1)
Follow the instructions in Section 6.15 or 6.16 to save an encoded stream to a TS file. In the pictured
example, the file was called “MOV1.ts”.
(2)
Connect the USB device containing the .ts file to a USB port on the decoder unit.
(3)
Return to the user interface “CH1” tab and change the “Input Interface” to “TSFILE” using the
dropdown menu.
(4)
In the “Location” text box, enter “/media/sda1/MOV1.ts”, where “MOV1.ts” matches the name of
the file to be decoded.
(5)
If desired, set “File Loop” to “ON” using the dropdown menu so the file will be replayed in a
continuous loop once the end is reached.
(6)
If desired, set “Audio Output” to “ON” using the dropdown menu to allow for audio with the decoded
video.
Figure 46 Channel 1 Tab – .ts File Decode
(1) Connect to
a USB Port
Figure 45 Z3-MVE-250 Rear Panel USB Connection
(2) Enter same path to the USB port and
desired file: “/media/sda1/MOV1.ts”
(1) Change to “TSFILE”
(4) Set Audio Output to “ON”
(3) Set to “ON” for continuous playback
