YOKOGAWA TA120E, Руководство пользователя

Страница: 68 / 165

7-9
IM 704420-01E
Outputting Signals, Initializing Setup Information, and Setting Key Lock
7
7.4 Initializing the Setup Information
There are two methods of initializing the setup information.
Keys
POWER
KEY
LOCK
MEAS
SET AVE /T
0
2
4
4
8
6
12
8
16
10
%
deg
%
20 180
us
ms ns
MEAS
x1
3TCD
xN
3TCD
xN
BI-PHASE
SPEED DELAY GATE TIME
FUNC GATE
LOCAL
DATA
SCALE PRESET
PHASE
10 20
TRIG CLOCK PHASE
AUTO MAN
GP-IB
REMOTE
EQLZ LEVEL PLL
SHIFT
ARM INH
DtoC
DVD
0.1s
0.5s
MAN
UTILITY OPTION
10
5
σ σ
Procedure
Note
• Check that it is okay to initialize the settings before actually initializing the settings. You
cannot set the settings back after initialization. We recommend that you transmit the
setup information to a PC using a communication command and save the information
beforehand.
• If you initialize the settings to factory default, the GP-IB address is also initialized.
Initializing the settings to factory default
1. Check that the power switch is turned OFF.
2. While pressing the MEAS key, turn ON the power switch. Hold the MEAS key
down for approximately 3 s. The settings are initialized.
Initializing the current setup information (settings excluding the GP-IB address
and the setup information that is stored in the internal memory)
1. Press the SHIFT+<(UTILITY) key. The display shows the characters [init].
2. Press the > key. The settings are initialized. When the initialization is finished,
the characters [donE] are displayed for approximately a second, and the
measurement is resumed.