2-2
IM 704420-01E
2.2
Rear Panel
OUT
EQLZ
ADJUST
KEY
LOCK
JITTER DC
MONITOR OUT
EQUALIZED RF/
(50
Ω
)
(0 to +5V)
OUT
IN
IN
3
A
M
P
(TTL)
(TTL)
(TTL)
(TTL)
GP-IB (IEEE488)
SLICED RF
OUT
CLOCK
EXT ARM
INHIBIT
BREAKER
CIRCUIT
250V AC 3A
100 - 240V AC
MODEL
SUFFIX
NO.
100VA MAX 50/60Hz
WARNING
EXT
OUT
LEVEL DC
(0 to +5V)
Jitter DC output connector
DC output of jitter ratio or determination output (section 7.1)
Equalizer adjustment trimmer
Adjusts the frequency characteristics of the equalizer (section 9.7)
Monitor output connector
Monitor output of RF signals or monitor output of equalized RF signals (section 7.2)
Data signal output connector
Outputs the binarized signal of the RF signal (section 7.2)
External arming input connector
Inputs the external arming signal (section 4.5)
Inhibit input connector
Inputs the inhibit signal (section 4.6)
Circuit breaker
Reset method (section 9.8)
Vent holes
Install the TA120E (section 3.2)
GP-IB connector
Connect the GP-IB cable (section 8.3)
KEY LOCK switch
Turns ON/OFF the key lock (section 7.6)
Warning and caution plate
Safety precautions (pages iv and v)
Precautions on the use of the instrument (section 3.1)
Power connector
Connect the power supply (section 3.3)
Name plate
Check the product (page ii)
Clock signal output connector
Outputs the clock signal that is applied to the clock input
connector or the clock signal that is regenerated by the PLL
signal (section 7.2).
Level DC output connector (option)*
EXT I/O terminal (option)*
* See the TA120E Digital Jitter Meter Option Function User's Manual (IM704420-51E).
