YOKOGAWA TA120E, Руководство пользователя

Страница: 66 / 165

7-7
IM 704420-01E
Outputting Signals, Initializing Setup Information, and Setting Key Lock
7
Outputting the data signal
You can output the data signal obtained through the binarization of the RF signal from
the data signal output connector on the rear panel at TTL levels.
Item Specifications
Output impedance 50
Ω
(typical value*)
Output level TTL level given that the monitor equipment receives the signal at high
impedance (approx. 1 M
Ω
).
* The typical value is a representative or standard value. It is not a warranted value.
(Data signal
output connector)
Data signal output circuit
OUT
SLICED RF
(TTL)
–5 V
+5 V
50
Ω
Outputting the clock signal
You can output the clock signal that is applied to the clock input connector from the
clock signal output connector on the rear panel at TTL levels. When the PLL circuit is
in operation, the clock signal regenerated by the PLL circuit is output.
Item Specifications
Output impedance 50
Ω
(typical value*)
Output level TTL level given that the monitor equipment receives the signal at high
impedance (approx. 1 M
Ω
).
* The typical value is a representative or standard value. It is not a warranted value.
(Clock signal
output connector)
Clock signal output circuit
OUT
CLOCK
(TTL)
–5 V
+5 V
50
Ω
7.2 Outputting Other Signals