YOKOGAWA TA120E Скачать руководство пользователя страница 2

Страница: 2 / 165

IM 704420-01E

Thank you for purchasing the YOKOGAWA TA120E Digital Jitter Meter.

This User’s Manual contains useful information about the functions, operating

procedures, and handling precautions of the instrument. To ensure correct use, please

read this manual thoroughly before operation.

Keep this manual in a safe place for quick reference in the event a question arises.

The following two manuals, including this one, are provided as manuals for the TA120E.

If you purchased a TA120E with option functions, read both manuals.

Manual Title

Manual No.

Description

TA120E Digital Jitter Meter

IM704420-01

This manual. Explains all the functions

User’s Manual

of the TA120E and their operating
procedures.

TA120E Digital Jitter Meter

IM704420-51

Explains the option functions of the

Option Functional User’s Manual

TA120E and their operating
procedures.

Notes

• The contents of this manual are subject to change without prior notice as a result of

continuing improvements to the instrument’s performance and functions. The figures

given in this manual may differ from the actual screen.

• Every effort has been made in the preparation of this manual to ensure the accuracy

of its contents. However, should you have any questions or find any errors, please

contact your nearest YOKOGAWA dealer as listed on the back cover of this manual.

• Copying or reproducing all or any part of the contents of this manual without

YOKOGAWA’s permission is strictly prohibited.

Trademarks

Company and product names used in this manual are trademarks or registered

trademarks of their respective holders.

Adobe and Acrobat are trademarks of Adobe System incorporated.

Revisions

• First Edition February 2001

Disk No. HF13

1st Edition: February 2001 (YK)

Содержание TA120E






































































































































































Результаты поиска

Содержание TA120E

Отзывы:

Похожие инструкции для TA120E

Бренды по названию

Популярные бренды

YOKOGAWA TA120E, Руководство пользователя

Результаты поиска

Содержание TA120E

Отзывы:

Похожие инструкции для TA120E

Бренды по названию

Популярные бренды