YOKOGAWA GS820 Скачать руководство пользователя страница 85

Страница: 85 / 286

Setting the Time Difference from GMT (Greenwich Mean Time)

Press the

Time Zone

soft key.

Press the

Edit

soft key.

Press the

and

keys to move the cursor to the desired position.

Use the

rotary knob

numeric keys

to set the time difference.

Press the

Set

soft key to confirm the setting.

Explanation

Setting the Date and Time

• Date (Year/Month/Day)

Set the year, month and day.

• Time (Hour/Minute/Second)

Set the time using a 24-hour clock.

Note

• The date and time settings are backed up with the lithium battery when the power is turned

OFF.

• Leap year information is retained.

Setting of the Time Difference from GMT

Set the time difference in the range of −12 hours 00 minutes to 13 hours 00 minutes.
For example, Japan standard time is ahead of GMT by 9 hours. In this case, set Hour to

9 and Minute to 00.

Checking the Standard Time

Check the standard time for the region where the GS820 is to be used using one of the

following methods.

• Check the date and time setting on your PC.
• Check the website at the following URL:http://www.worldtimeserver.com/

Note

The GS820 does not support Daylight Savings Time. To set the Daylight Savings Time, adjust

the time difference from GMT.

<<Corresponding Command Mnemonic>>

:SYSTem:CLOCk:DATE <character string>

:SYSTem:CLOCk:TIME <character string>

:SYSTem:CLOCk:TZONe <character string>

:SYSTem:CLOCk:ADJust

3.7 Setting the Date, Time, and the Time Difference from GMT (Greenwich Mean Time)

3-16

IM 765601-01E

Содержание GS820































































































































































































































































































Результаты поиска

Содержание GS820

Отзывы:

Похожие инструкции для GS820

Бренды по названию

Популярные бренды

YOKOGAWA GS820, Руководство пользователя

Результаты поиска

Содержание GS820

Отзывы:

Похожие инструкции для GS820

Бренды по названию

Популярные бренды