Execution Errors (−200 to −299)
Error No.
Error Message
Corrective Action
Page
−222
Data out of range
Check the selectable range of the parameter.
If the command can use MINimum and MAXimum as
its parameter, the range can also be queried.
—
−256
Filename not found
Check that the file exists.
You can also use the CATalog? command to query the
list of files.
16-16,
16-29,
16-38
−285
Program syntax error
Check that the sweep pattern file is in the correct format. 2-22
Device Errors (−300 to −399)
Error No.
Error Message
Corrective Action
Page
−350
Queue overflow
Read the error using :SYSTem:ERRor? or clear the
error queue using *CLS.
16-38,
16-43,
16-50
−361
Parity error
Check that the communication settings on the GS820
and PC match.
If the settings are correct, check the cable, and lower
the baud rate.
15-5
−362
Framing error
Check that the communication settings on the GS820
and PC match.
If the settings are correct, check the cable, and lower
the baud rate.
15-5
−363
Input buffer overrun
Set the handshaking to a setting other than OFF.
Lower the baud rate.
15-4
Query Errors (−400 to −499)
Error No.
Error Message
Corrective Action
Page
−410
Query INTERRUPTED
Check transmission/reception procedure.
16-3
−420
Query UNTERMINATED
Check transmission/reception procedure.
16-3
−430
Query DEADLOCK
Keep the length of a program message less than or
equal to 64 KB.
16-3
17.2 Error Code Descriptions and Corrective Actions
17-4
IM 765601-01E
