8-3 Shared Memory Batch Monitor
8
−
13
Builder
Chapter 8 Test
Changing values
This section describes how to change the value of shared memory from the
batch monitor.
Changing bit memory
1. Double-click the bit memory address number you wish to change.
2. The [SET/RESET] dialog box is displayed.
Number
Item Contents
1) [SET]
button
Turns the specified bit memory ON.
2) [RESET]
button
Turns the specified bit memory OFF.
3) Number
of
point
Specifies the number of points to change simultaneously.
Example: If CB0 is selected and 10 is specified for the [Number
of point], then ten points (CB0 to CB9) are changed
simultaneously.
4) [Specify
memory]
button
Switches the shared memory to be changed.
3. Click the [SET]/[RESET] buttons after setting the necessary items.
M
M
M
E
E
E
M
M
M
O
O
O
♦
If bit memory is selected, pressing the [F7]/[F8] key toggles the ON/OFF
settings of 1 point of bit memory.
1)
2)
3)
4)
