5-7 Address Setting
5
−
51
Builder
Chapter 5 Operating Objects
Communication Address Settings
Select the communications address in one of the following formats.
MP2500
[Target ID]
：
[Register classification] [Register type] [Address]
[Bit number] [Mode]
Item Meaning
Target ID
Select 1 if the motion card is in slot 1 and select 2 if the motion card is
in slot 2.
Select the register classification.
Classification Address
domain
Explanation
S
0 to 8191
System register
I
0 to FFFF
Input/motion register
O
0 to FFFF
Output/motion register
M
0 to 65534
Global register
Register
classification
Select the register type. .
Classification Explanation
B Bit
W Word(2Byte)
F Float(4Byte)
L Long(4Byte)
Register type
Address
Select an address.
Bit number
If B is specified as the register type, enter a hexadecimal number as the
bit number. If the setting for the bit number is omitted, the bit number
is set to zero (0) by default.
Mode
If using a high-speed protocol, add an at sign, (@).
Example: 1:SB0.A
、
2:IBA.0@
1:OW1E
、
2:MF30@, 1:SL40
M
M
M
E
E
E
M
M
M
O
O
O
♦
The target ID may be omitted. If so, make sure that the motion card is
mounted in slot 1 before using it.
♦
If the MP2500 register has been set to “MP2100/MP2500-1 slot”,
the target
ID is not displayed in the Builder program.
