YASKAWA iQpump1000, Быстрый старт

Страница: 146 / 356

• Increase both the Add Freq Level and Add Dly Time
Table 4.11 Related Parameters for Duplex System with Fine Tuning Application Example
Description
Drive A
<1>
Drive B
<1>
Run Source: 1 (Terminals) b1-02 = 1 b1-02 = 1
Node Address H5-01 = 1 H5-01 = 2
Highest Node Address P9-25 = 2 P9-25 = 2
Pump Mode: 3 (Network) P1-01 = 3 P1-01 = 3
Feedback Source: 0 (Analog) P9-02 = 0 P9-02 = 0
Lag Fixed Speed P9-06 = 54.0 Hz P9-06 = 54.0 Hz
Setpoint U5-99 = 100 PSI U5-99 = 100 PSI
Start Level P1-04 = 140 PSI P1-04 = 140 PSI
High Feedback Quick De-Stage P9-18 = 89.3% P9-18 = 89.3%
Setpoint Modifier P9-17 = 5.0 PSI P9-17 = 5.0 PSI
Add Drive Frequency Level P9-09 = 59.0 Hz P9-09 = 59.0 Hz
Add Drive Delay P9-11 = 12.0 s P9-11 = 12.0 s
<1> All other multiplexing and alternation parameters are set to default settings.
Duplex System with Jockey Pump Example
A customer requires a pump system with the following requirements:
• One small pump (the Jockey pump) will run the system during off-peak times.
• Two larger pumps will run the system when the demand is higher.
• The Jockey pump should not run when the two larger pumps are running.
• Pump wear is still an issue, but it is expected that the small pump will run longer hours and will always run first after a loss
of power.
• The feedback scale is 145 PSI.
• There is only one feedback transducer in the system.
(Jockey Pump)
10 HP
R+ S+ S- R-
A2
AC
+V
A1
SN
S1
Drive B
15 HP
R+ S+ S- R-
A2
AC
+V
A1
SN
S1
SYSTEM PRESSURE
FEEDBACK
Drive C
15 HP
R+ S+ S- R-
A2
AC
+V
A1
SN
S1
Figure 4.22 Simplified Wiring Diagram
Table 4.12 Related Parameters for Duplex System with Jockey Pump Example
Description
Jockey Pump
<1>
Drive B
<1>
Drive C
<1>
Node Address H5-01 = 1 H5-01 = 2 H5-01 = 3
Highest Node Address P9-25 = 3 P9-25 = 3 P9-25 = 3
Pump Mode: 3 (Network) P1-01 = 3 P1-01 = 3 P1-01 = 3
Feedback Source: 0 (Analog), 3
(Network)
P9-02 = 0 P9-02 = 3 P9-02 = 3
Lag Drive Speed: 0 (Always), 2
(Turn Off)
P9-05 = 2 P9-05 = 0 P9-05 = 0
Allow Net Run: 0 (Always), 2 (First
Only)
P9-20 = 2 P9-20 = 0 P9-20 = 0
4.5 iQpump Presets and Functions
146 YASKAWA TOEP YAIP1W 01A YASKAWA AC Drive - iQpump1000 Quick Start Guide