Yamaha YZ250(V), Руководство по эксплуатации для владельца

Страница: 426 / 596

5-29
CHAS
FRONT FORK
Adjuster
1. Drain the outer tube of its front fork oil at its
top.
2. Loosen:
9 Adjuster
1
3. Remove:
9 Adjuster
1
NOTE:
9
While compressing the inner tube
2
, set the
cap bolt ring wrench
4
between the inner tube
and locknut
3
.
9
Hold the locknut and remove the adjuster.
c C
Do not remove the locknut as the damper
rod may go into the damper assembly and
not be taken out.
Cap bolt ring wrench:
YM-01501/90890-01501
EC553201
Inner tube
1. Remove:
9 Dust seal
1
9 Stopper ring
2
Using slotted-head screwdriver.
c C
Take care not to scratch the inner tube.
2. Remove:
9 Inner tube
1
Oil seal removal steps:
9
Push in slowly
a
the inner tube just be-
fore it bottoms out and then pull it back
quickly
b
.
9
Repeat this step until the inner tube can
be pulled out from the outer tube.
1P8-9-31-5B 9/12/05 2:51 PM Page 8