manualshive.com logo in svg

Yamaha Electone F-15, Руководство пользователя

Поделиться
Скачать
Yamaha Electone F-15 Скачать руководство пользователя страница 68

Operation

62

 

3. Push the tilt support knob into the clamp

bracket to support the engine.

WARNING! After tilting the outboard
motor, be sure to support it with the
tilt support knob or tilt support lever.
Otherwise the outboard motor could
fall back down suddenly if oil in the
power trim and tilt unit or in the pow-
er tilt unit loses pressure.

 [EWM00263]

NOTICE:

 Do not use the tilt support

lever or knob when trailering the
boat. The outboard motor could
shake loose from the tilt support and
fall. If the motor cannot be trailered in
the normal running position, use an
additional support device to secure it
in the tilt position. For more detailed
information, see page 67.

 [ECM01642]

EMU30193

Procedure for tilting down (manual 
tilt models)

1. Place the tilt lock lever in the lock posi-

tion.

2. Slightly tilt the engine up until the tilt sup-

port bar is automatically released.

UP

ZMU01787

ZMU05580

UP

UP

ZMU04900

ZMU02812

ZMU05541

6AG-9-3D-1E0.book  62 ページ  ２０１５年１１月５日　木曜日　午前１１時７分

Содержание Electone F-15















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды