manualshive.com logo in svg

Yamaha Electone F-15, Руководство пользователя

Поделиться
Скачать
Yamaha Electone F-15 Скачать руководство пользователя страница 39

Components

33

To lock it, set the tilt lock lever in the lock po-
sition. To release, push the tilt lock lever in
the release position.

EMU26322

Tilt support knob

To keep the outboard motor in the tilted up
position, push the tilt support knob under the
swivel bracket.

NOTICE

ECM00661

Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to se-
cure it in the tilt position.

EMU26334

Tilt support bar

The tilt support bar keeps the outboard motor
in the tilted up position.

NOTICE

ECM01661

Do not use the tilt support bar when
trailering the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the
tilt position.

EMU26362

Power tilt unit

This unit tilts the outboard motor up and
down and is controlled with the power tilt
switch.

NOTICE

ECM00631

Do not step on or exert pressure on the
power tilt motor. The power tilt unit could
be damaged as a result.

1. Tilt lock lever (Release / tilt-up)

ZMU05631

1

ZMU02812

ZMU05528

6AG-9-3D-1E0.book  33 ページ  ２０１５年１１月５日　木曜日　午前１１時７分

Содержание Electone F-15















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды