manualshive.com logo in svg

Yamaha Electone F-15, Руководство пользователя

Поделиться
Скачать
Yamaha Electone F-15 Скачать руководство пользователя страница 22

Specifications and requirements

16

maximum horsepower rating. See the boat’s
capacity plate or contact the manufacturer.

EMU33572

Mounting motor

WARNING

EWM01571

Improper mounting of the outboard mo-
tor could result in hazardous condi-
tions such as poor handling, loss of
control, or fire hazards.

Because the motor is very heavy, spe-
cial equipment and training is required
to mount it safely.

Your dealer or other person experienced in
proper rigging should mount the motor using
correct equipment and complete rigging in-
structions. For further information, see page
38.

EMU33582

Remote control requirements

WARNING

EWM01581

If the engine starts in gear, the boat can
move suddenly and unexpectedly, pos-
sibly causing a collision or throwing
passengers overboard.

If the engine ever starts in gear, the
start-in-gear protection device is not
working correctly and you should dis-
continue using the outboard. Contact
your Yamaha dealer.

The remote control unit must be equipped
with a start-in-gear protection device(s). This
device prevents the engine from starting un-
less it is in neutral.

EMU25695

Battery requirements

EMU25716

Specifications of Battery

Use a fully charged battery that meets the
following specifications. The engine cannot

be started if battery voltage is too low.

NOTICE

ECM01063

Do not use a battery that does not meet
the specified capacity. If a battery that
does not meet specifications is used,
the electric system could perform poor-
ly or be overloaded, causing electric
system damage.

Do not use a battery which exceeds the
maximum CCA rating. If the batteries
are used in parallel circuit, use new bat-
teries of the same type and make sure
that the total battery rating never ex-
ceed the maximum CCA rating.

EMU36293

Mounting battery

Mount the battery holder securely in a dry,
well-ventilated, vibration-free location in the
boat. 

WARNING! Do not put flammable

items, or loose heavy or metal objects in
the same compartment as the battery.
Fire, explosion or sparks could result.

[EWM01821]

Battery cable

The battery cable size and length are critical.
Consult your Yamaha dealer about the bat-
tery cable size and length.

Battery rating (CCA/SAE):

245–433 A (F15EHA, F15PHA, 

F20EA, F20EHA, F20PA, F20PHA)

Battery rating (MCA/ABYC):

323–520 A (F15EHA, F15PHA, 

F20EA, F20EHA, F20PA, F20PHA)

Battery rating (RC/SAE):

52 minutes (F15EHA, F15PHA, 

F20EA, F20EHA, F20PA, F20PHA)

6AG-9-3D-1E0.book  16 ページ  ２０１５年１１月５日　木曜日　午前１１時７分

Содержание Electone F-15















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды