manualshive.com logo in svg

Yamaha Electone F-15, Руководство пользователя

Поделиться
Скачать
Yamaha Electone F-15 Скачать руководство пользователя страница 42

36

Engine control system

EMU26805

Alert system

NOTICE

ECM00093

Do not continue to operate the engine if
an alert device has activated. Consult
your Yamaha dealer if the problem cannot
be located and corrected.

EMU2681D

Overheat alert

This engine has an overheat-alert device. If
the engine temperature rises too high, the
alert device will activate.

The engine speed will automatically de-
crease to about 2000 r/min.

The overheat-alert indicator will light or
blink.

The buzzer will sound (if equipped on the
tiller handle, remote control box, or main
switch panel).

If the alert system has activated, stop the en-

gine and check the cooling water inlets:

Check trim angle to be sure that the cool-
ing water inlet is submerged.

Check the cooling water inlet for clogging.

EMU3016C

Low oil pressure alert

If the oil pressure drops too low, the alert de-
vice will activate.

The engine speed will automatically de-
crease to about 2000 r/min. If equipped
with a low oil pressure-alert indicator, it will
light or blink.

The buzzer will sound (if equipped on the
tiller handle, remote control box, or main
switch panel).

ZMU05592

ZMU02360

ZMU05531

6AG-9-3D-1E0.book  36 ページ  ２０１５年１１月５日　木曜日　午前１１時７分

Содержание Electone F-15















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды