manualshive.com logo in svg

Yamaha Electone F-15, Руководство пользователя

Поделиться
Скачать
Yamaha Electone F-15 Скачать руководство пользователя страница 56

Operation

50

3. Place the throttle grip in the “

”

(start) position.

4. Pull the manual starter handle slowly un-

til you feel resistance. Then give a
strong pull straight out to crank and start
the engine. Repeat if necessary.

5. After the engine starts, slowly return the

manual starter handle to its original posi-
tion before releasing it.

TIP:

When the engine is cold, it needs to be
warmed up. For further information, see
page 54.
6. Slowly return the throttle grip to the fully

closed position.

Starting procedure (warm engine)
1. Place the gear shift lever in neutral.

TIP:

The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2. Attach the engine shut-off cord to a se-

cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.

3. Open the throttle grip as shown in the il-

lustration.

ZMU06522

ZMU05536

ZMU05533

N

ZMU02026

ZMU06609

6AG-9-3D-1E0.book  50 ページ  ２０１５年１１月５日　木曜日　午前１１時７分

Содержание Electone F-15















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды