background image

Table 32:   TX FEC Ports (cont'd)

Ports

Dir

Clock Domain

Description

CH[0/1]_TXDATA[159:0]

In

CH[0/1]_TXUSRCLK2

Input TX data, must use 160-bit interface

when FEC is enabled.

CH[0/1]_TXDATASTART

In

CH[0/1]_TXUSRCLK2

Start of codeword.

The transmit portion of the Integrated KP4 RS-FEC operates internally in the CH0_TXUSRCLK
and CH1_TXUSRCLK domains. Data input on CH0_TXDATA is clocked on the rising edge of
CH0_TXUSRCLK2, and data input on CH1_TXDATA is clocked on the rising edge of
CH1_TXUSRCLK2, just as when the FEC is not enabled.

When configured in 100G mode (combined slice 0 and slice 1 operation), all data from both
channels must be driven by the CH0_TXUSRCLK2 clock. The CH1_TXUSRCLK and
CH1_TXUSRCLK2 inputs can be tied to ground.

The following table shows the TX FEC-related attributes for the GTM dual.

Table 33:   TX FEC Attributes

Attribute

Type

Description

FEC_CFG0

16-bit

Reserved.

Bit Name

Address

Description

FEC_TX0_MODE

[3:0]

Operation mode for FEC TX slice 0:

4’b0000

: FEC is disabled for this channel.

4’b0001

: 50G KP4 FEC, 50GAUI-1 format.

4’b0010

: 100G KP4 FEC, 100GAUI-2 format.

4’b0101

: 50G raw KP4 FEC without scrambling.

4’b1101

: 50G raw KP4 FEC with scrambling.

Others: Invalid.

FEC_TX1_MODE

[7:4]

Operation mode for FEC TX slice 1:

4’b0000

: FEC is disabled for this channel.

4’b0001

: 50G KP4 FEC, 50GAUI-1 format.

4’b0010

: 100G KP4 FEC, 100GAUI-2 format.

4’b0101

: 50G raw KP4 FEC without scrambling.

4’b1101

: 50G raw KP4 FEC with scrambling.

Others: Invalid.

Chapter 3: Transmitter

UG581 (v1.0) January 4, 2019

 

www.xilinx.com

Virtex Ult GTM Transceivers

 64

Send Feedback

Содержание Virtex UltraScale+ FPGAs


















































































































































Отзывы: