manualshive.com logo in svg

Xilinx Virtex UltraScale+ FPGAs, Руководство пользователя

Продукт Xilinx Virtex UltraScale+ FPGAs идеально подходит для разработки высокопроизводительных цифровых систем. Вы можете скачать бесплатные руководства пользователя для этого продукта на нашем manualshive.com, чтобы узнать больше о его возможностях и функциях.

Поделиться
Скачать
background image

Please Read: Important Legal Notices

The information disclosed to you hereunder (the "Materials") is provided solely for the selection
and use of Xilinx products. To the maximum extent permitted by applicable law: (1) Materials are
made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS ALL WARRANTIES AND
CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY
PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether in contract or tort, including
negligence, or under any other theory of liability) for any loss or damage of any kind or nature
related to, arising under, or in connection with, the Materials (including your use of the
Materials), including for any direct, indirect, special, incidental, or consequential loss or damage
(including loss of data, profits, goodwill, or any type of loss or damage suffered as a result of any
action brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx
had been advised of the possibility of the same. Xilinx assumes no obligation to correct any
errors contained in the Materials or to notify you of updates to the Materials or to product
specifications. You may not reproduce, modify, distribute, or publicly display the Materials
without prior written consent. Certain products are subject to the terms and conditions of
Xilinx's limited warranty, please refer to Xilinx's Terms of Sale which can be viewed at 

https://

www.xilinx.com/legal.htm#tos

; IP cores may be subject to warranty and support terms contained

in a license issued to you by Xilinx. Xilinx products are not designed or intended to be fail-safe or
for use in any application requiring fail-safe performance; you assume sole risk and liability for
use of Xilinx products in such critical applications, please refer to Xilinx's Terms of Sale which can
be viewed at 

https://www.xilinx.com/legal.htm#tos

.

AUTOMOTIVE APPLICATIONS DISCLAIMER

AUTOMOTIVE PRODUCTS (IDENTIFIED AS "XA" IN THE PART NUMBER) ARE NOT
WARRANTED FOR USE IN THE DEPLOYMENT OF AIRBAGS OR FOR USE IN APPLICATIONS
THAT AFFECT CONTROL OF A VEHICLE ("SAFETY APPLICATION") UNLESS THERE IS A
SAFETY CONCEPT OR REDUNDANCY FEATURE CONSISTENT WITH THE ISO 26262
AUTOMOTIVE SAFETY STANDARD ("SAFETY DESIGN"). CUSTOMER SHALL, PRIOR TO USING
OR DISTRIBUTING ANY SYSTEMS THAT INCORPORATE PRODUCTS, THOROUGHLY TEST
SUCH SYSTEMS FOR SAFETY PURPOSES. USE OF PRODUCTS IN A SAFETY APPLICATION
WITHOUT A SAFETY DESIGN IS FULLY AT THE RISK OF CUSTOMER, SUBJECT ONLY TO
APPLICABLE LAWS AND REGULATIONS GOVERNING LIMITATIONS ON PRODUCT
LIABILITY.

This document contains preliminary information and is subject to change without notice.
Information provided herein relates to products and/or services not yet available for sale, and
provided solely for information purposes and are not intended, or to be construed, as an offer for
sale or an attempted commercialization of the products and/or services referred to herein.

Appendix B: Additional Resources and Legal Notices

UG581 (v1.0) January 4, 2019

 

www.xilinx.com

Virtex Ult GTM Transceivers

 144

Send Feedback

Содержание Virtex UltraScale+ FPGAs


















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Virtex UltraScale+ FPGAs

Magnetrol Eclipse 706GWR Safety Manual preview
Eclipse 706GWR
Бренд: Magnetrol Страницы: 16
Magnetrol Eclipse 706GWR Installation And Operating Manual preview
Eclipse 706GWR
Бренд: Magnetrol Страницы: 108
Magnetrol Jupiter JM4 Installation And Operating Manual preview
Jupiter JM4
Бренд: Magnetrol Страницы: 35
Magnetek Flex Pro Instruction Manual preview
Flex Pro
Бренд: Magnetek Страницы: 25
X-Boss AC2000 Quick Start Manual preview
AC2000
Бренд: X-Boss Страницы: 2
Yamaha RX-A2000 Quick Reference Manual preview
RX-A2000
Бренд: Yamaha Страницы: 8
Yamaha RX-V420 Service Manual preview
RX-V420
Бренд: Yamaha Страницы: 67
Yamaha RX-V596 Service Manual preview
RX-V596
Бренд: Yamaha Страницы: 54
Yamaha RX-V795a Service Manual preview
RX-V795a
Бренд: Yamaha Страницы: 70
Yamaha V665 - RX AV Receiver Hook-Up Example preview
V665 - RX AV Receiver
Бренд: Yamaha Страницы: 2
Yamaha HTR-5063 Quick Reference Manual preview
HTR-5063
Бренд: Yamaha Страницы: 8
Yamaha HTR-5065 Owner'S Manual preview
HTR-5065
Бренд: Yamaha Страницы: 478
Yamaha RX-V375 Setup Manual preview
RX-V375
Бренд: Yamaha Страницы: 18
Yamaha RX-V861 Service Manual preview
RX-V861
Бренд: Yamaha Страницы: 143
Yamaha RXV559 - AV Receiver Service Manual preview
RXV559 - AV Receiver
Бренд: Yamaha Страницы: 116
Yamaha RX-V1700 Service Manual preview
RX-V1700
Бренд: Yamaha Страницы: 162
Yamaha CinemaDSP digital RX-Z1 Service Manual preview
CinemaDSP digital RX-Z1
Бренд: Yamaha Страницы: 164
Yamaha RXV1065 - RX AV Receiver Service Manual preview
RXV1065 - RX AV Receiver
Бренд: Yamaha Страницы: 166

Бренды по названию

Популярные бренды

Загрузить еще бренды