Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 80

Страница: 80 / 362

Windows using Microsoft (R) Networking

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

Touch

[TCP/IP-Line Printer]

, in the

TCP/IP - Line Printer

screen,

Touch

[Enable]

, to enable the option.

If you wish to change the LPR port for your device, touch the port number area and enter the
desired port number using the numerical keypad.

Note:

While you can change the port number at which your machine will accept LPR print jobs it is

recommended that you do this ONLY with extreme caution as most LPR spoolers are set to send
print jobs to the default port.

Touch

[Save]

, then touch

[Close]

10. Touch

[Microsoft Networks]

, the

Microsoft (R) Networks

screen displays.

Touch

[Microsoft Enablement]

Touch

[Enable]

to enable the Microsoft Network protocols.

For

Transport

, select

[IP/Ethernet]

. Touch

[Save]

to return to the

Microsoft (R) Network

screen.

11. Touch

[Workgroup and Host]

, in the

Workgroup and Host

screen:

For

Workgroup Name

touch detail bar.

Touch

[Clear Text]

to clear the default name, enter Name using the on-screen keyboard. To

access more characters, touch

[123]

on the user interface.

Touch

[Save]

, to return to the

Workgroup and Host

screen and repeat for

SMB Host Name

Touch

[Save]

to return to the

Microsoft (R) Networks

screen.

12. Touch

[Printer Description]

. In the

Printer Description

screen:

For

Printer Name

, touch detail bar.

Touch

[Clear Text]

to clear the default name, enter description using the on-screen keyboard.

To access more characters, touch

[123]

on the user interface.

Touch

[Save]

, to return to the

Printer Description

screen and repeat for

Printer Description

Touch

[Save]

to return to the

Microsoft (R) Networks

screen.

13. Touch

[Connections]

, in the

Connections

screen:

For

Maximum Connections

, touch the detail box, enter the desired maximum simultaneous

connections using the numerical keypad.

For

Connection Timeout

, touch the detail box, enter the desired number of seconds for

timeout using the numerical keypad.

Touch

[Save]

to return to the

Microsoft (R) Networks

screen.

14. Press the

<Log In/Out>

button, touch

[Logout]

to exit the Tools pathway.

Wait for the device to reboot.

15. Press the

<Machine Status>

button.

Touch

[Machine Information]

tab.

Touch

[Print Reports]

Touch

[Print Report]

The Configuration Report will print. On the report verify the details under

Network Setup

heading are correct.

Touch

[Close]

16. Install Print Drivers on your network or client workstation using the instructions on the following

pages.

Содержание WORKCENTRE 5735











































































































































































































































































































































































Результаты поиска

Содержание WORKCENTRE 5735

Отзывы:

Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 80 / 362

Результаты поиска

Содержание WORKCENTRE 5735

Отзывы: