Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 79

Страница: 79 / 362

Windows using Microsoft (R) Networking

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

Windows using Microsoft

(R)

Networking

NetBIOS over IP

Information Checklist

Before starting the procedure, ensure the following items are available or tasks have been performed:

•

An existing operational network utilizing the TCP/IP protocol.

•

A Static IP Address for the machine.

•

A Subnet Mask Address for the machine.

•

A Gateway Address for the machine.

•

A Host Name for the machine.

•

Ensure device is connected to the network with an Ethernet Cable.

•

The CentreWare Print and Fax Drivers CD (delivered with your machine).

At the Machine

Note:

To configure this feature or these settings access the

Tools

pathway as a System

Administrator. For details, refer to

Access Tools Pathway as a System Administrator

on page 18.

From the

Tools

pathway, touch

[Network Settings]

Touch

[Network Setup]

Touch

[TCP/IP]

Touch

[TCP/IP Settings]

In the

TCP/IP Settings

screen:

Touch the

[Automatic Addressing]

button.

Touch

[Disabled]

Touch

[Save]

Touch

[IP Address/Host Name]

, in the

IP Address/Host Name

screen:

For

IPv4 Address

, touch each octet and enter the IP address using the numerical keypad.

For

Host Name

, touch detail bar.

Enter Host Name using the on-screen keyboard. To access more characters, touch

[123]

the user interface.

Touch

[Save]

, then touch

[Save]

to return to the

TCP/IP Settings

screen.

Touch

[Subnet and Gateway]

, in the

Subnet and Gateway

screen:

For

IP Gateway

, touch each octet under the title and enter IP Gateway address using the

numerical keypad.

Repeat this process for the

Subnet Mask

. When you are finished, touch

[Save]

to accept the

changes and return to the

TCP/IP Settings

screen.

Touch

[Close]

to return to the

TCP/IP

screen.

Содержание WORKCENTRE 5735











































































































































































































































































































































































Результаты поиска

Содержание WORKCENTRE 5735

Отзывы:

Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 79 / 362

Результаты поиска

Содержание WORKCENTRE 5735

Отзывы: