Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 197

Страница: 197 / 362

On Demand Overwrite

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

197

Information Checklist

Before starting the procedure, ensure the following items are available or tasks have been performed:

•

Ensure the device is fully functioning on the network.

•

Ensure TCP/IP and HTTP are configured on the device as per

Enable TCP/IP and HTTP at the

Device

on page 19, so that the web user interface (Internet Services) can be accessed.

•

Ensure that no one is currently using the device.

At your Workstation:

Note:

To configure this feature or these settings access the

Properties

tab as a System

Administrator. For details, refer to

Access Internet Services as System Administrator

on page 24.

From the

Properties

tab, click on the

[Security]

link.

Click on the

[On Demand Overwrite]

link.

Select

[Manual]

in the directory tree.

Click on the

[Start]

button for either

Standard

Full

image overwrite.

A confirmation pop-up screen displays. Click on the

[OK]

button and the overwrite will commence.

The device will be taken offline and will be unable to receive any incoming jobs. Any existing jobs
in the queue will be deleted.

The network controller will reboot and network functionality will be unavailable for several
minutes. When rebooted, the

On Demand Overwrite Confirmation Report

will print. This details

the status and time of the overwrite.

To verify the overwrite has completed, view the report. Under Confirmation Details: The Job
Information: Status ESS Disk should read '

SUCCESS

Note:

If you wish to backup jobs and folders prior to Full Overwrite, on the

On Demand Overwrite:

Manual

page, click on the link at the bottom of the page to navigate to the

Reprint Saved Jobs

feature. For more information on Reprint Saved Jobs feature, refer to

Reprint Saved Jobs

page 305.

To Schedule On Demand Overwrite

A TCP/IP network-connected device can be set to overwrite image data on a daily, weekly, or monthly
basis. To schedule a daily overwrite, perform the following steps.

Note:

To configure this feature or these settings access the

Properties

tab as a System

Administrator. For details, refer to

Access Internet Services as System Administrator

on page 24.

From the

Properties

tab, click on the

[Security]

link.

Click on the

[On Demand Overwrite]

link.

Select

[Scheduled]

in the directory tree.

In the

On Demand Overwrite > Scheduled

page:

From the

[Frequency]

drop-down menu, select the frequency for the overwrite to occur.

[Daily]

is selected

specify the time for the Overwrite in

[Time

] (24-Hour Clock). The device

will be taken offline each day at the time specified to perform the overwrite.
If

[Weekly]

is selected, select a day in the week for

[Day of Week]

. For

[Time]

specify the

Содержание WORKCENTRE 5735











































































































































































































































































































































































Результаты поиска

Содержание WORKCENTRE 5735

Отзывы:

Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 197 / 362

Результаты поиска

Содержание WORKCENTRE 5735

Отзывы: