Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 76

Страница: 76 / 362

Windows 2000/2003 using AppleTalk

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

Windows 2000/2003 using AppleTalk

Information Checklist

Before starting the procedure, ensure the following items are available or tasks have been performed:

•

An existing operational AppleTalk network with Macintosh workstation computers equipped with
Ethernet network interface cards.

•

The AppleTalk Name you wish to assign to your printer.

•

The AppleTalk Zone (if used) in which your printer will reside.

•

Ethernet Cable.

•

The Internet Services Print and Fax Drivers CD (delivered with your device). Review any README
file contained with the Print Drivers.

At the Device

Note:

To configure this feature or these settings access the

Tools

pathway as a System

Administrator. For details, refer to

Access Tools Pathway as a System Administrator

on page 18.

From the

Tools

pathway, touch

[Network Settings]

Touch

[Network Setup]

Touch

[AppleTalk Settings]

, the

AppleTalk (R) Settings

screen displays.

Touch

[AppleTalk (R) Enablement]

Touch

[Enable]

for Protocol.

Touch

[Save]

to return to

AppleTalk (R) Settings

screen.

Touch

[Name and Area]

Touch

[Printer Name]

field and enter the desired text using the on-screen keyboard, touch the

[Save]

button.

Touch

[Area Name]

field, enter the desired text using the on-screen keyboard, (the printer default

is * which means the printer will appear in ALL areas). Use the

hard button to clear out the

default name prior to entering your new name).

10. Touch

[Save]

11. Touch

[Save]

again, touch

[Close]

12. Press the

<Log In/Out>

button, touch

[Logout]

to exit the Tools pathway.

13. Wait few minutes for the machine to reboot. Press the

<Machine Status>

button.

Touch the

[Machine Information]

tab.

Touch

[Print Reports]

Touch

[Print Report]

Touch

[Close]

The Configuration Report will print. On the report verify the details under

Network Setup

heading are correct.

Содержание WORKCENTRE 5735











































































































































































































































































































































































Результаты поиска

Содержание WORKCENTRE 5735

Отзывы:

Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 76 / 362

Результаты поиска

Содержание WORKCENTRE 5735

Отзывы: