Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 292 / 362

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 292
Configure a Fax Repository using NetWare
Information Checklist
Before starting the procedure, ensure the following items are available or tasks have been performed:
• Ensure the device is fully functioning on the network prior to installation.
• Create a new directory on the NetWare server to be used as the fax repository. Note down the
server name, server volume, directory path, NDS Context and Tree, if applicable.
• Create a user account and password with access to the fax repository. When a document is faxed,
the machine logs in using the account, transfers the file to the server and then logs out.
• Ensure the NetWare protocol is enabled on your machine.
Print a Configuration Report to verify that the NetWare protocol is enabled on your machine.
1. Press the <Machine Status> button.
2. Touch the [Machine Information] tab.
3. Touch [Print Reports] .
4. Touch [Print Report] .
5. Touch [Close] .
The Configuration Report will print. On the report check under Network Setup heading if Netware
protocol is enabled.
Enter the Fax Repository Details via Internet Services
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to Access Internet Services as System Administrator on page 24.
1. From the Properties tab, click on the [Services] link.
2. Click on the [Server Fax] link.
3. Select [Fax Repository Setup] in the directory tree.
4. In the Settings area:
a. Select NetWare from the [Protocol] drop-down menu.
b. Enter the host name or the NetWare server in the [Server Name] field.
c. Enter the path to the Repository on the NetWare server in the [Server Volume] field.
d. Enter NDS tree details in the [NDS Tree] field. The default tree name is “Xerox_DS_Tree”.
Note: If you are using Bindery or Bindery emulation, leave this field blank. If you are using NDS,
this field cannot be left blank.
e. Enter the name for the NDS context in the [NDS Context] field. The default context name is
“Xerox_DS_Context”.
Note: If you are using Bindery or Bindery emulation, leave this field blank. If you are using NDS,
this field cannot be left blank.
f. Type in the path to the location of the repository server in [Document Path] . For example:
/(directory name)/(directory name) .
g. In the [Login Credentials to Access the Destination] area, select one of the following: