Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 130

Страница: 130 / 362

Network Configuration

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

130

AS400 Raw TCP/IP Printing to Port 9100 (CRTDEVPRT)

This is the procedure to set up printing to a device from an AS400 using the SNMP drivers.

This procedure is intended for users familiar with the AS400 system, especially those experienced with
printing in an AS400 environment.

The AS400 must run V4R5 of OS400 so that the SNMP drivers are present (or V4R3/V4R4 with the
most current PTFs installed).

The device must have port 9100 enabled.

Procedures to Enable Port 9100

Note:

To configure this feature or these settings access the

Properties

tab as a System

Administrator. For details, refer to

Access Internet Services as System Administrator

on page 24.

From the

Properties

tab, click on the

[Connectivity]

link.

Click on the

[Protocols]

link.

Select

[Raw TCP/IP Printing]

in the directory tree.

In the

General

area:

For

Protocol,

check the

[Enabled]

checkbox to enable Raw TCP/IP Printing.

Physical Connection

displays the physical network connection, this will always display

“Ethernet”

Up to three ports may be enabled and configured, in the

Port Information

area:

For

Port 1

Leave the

TCP Port Number

set to

9100

. If two additional ports are available, click

on the

[Default All]

button to see if they set to 9101 and 9102 respectively (emulating HP

JetDirect EX Plus 3).

Leave the

Bidirectional

checkboxes and

Maximum Connections per Port

settings at their

default values.

Set the

End of Job Timeout

to the number of seconds to wait before processing a job

without an End Of Job indicator. The range is from 1 to 65535, and the default is 300.

Leave the

PDL Switching

[Enabled]

checkbox at its default value.

Note:

Do not check the

[Enabled]

checkbox for

PDL Switching

, when Windows clients print using

port 9100. this prevents each print job from generating a banner page.

Click on the

[Apply]

button to accept the changes or

[Undo]

to return the settings to their

previous values, or

[Default All]

to enter printer defaults for all settings (recommended).

Click on the

[OK]

button when you see the message

“Properties have been successfully

modified”

Create a Device Description

Create a device description from your AS400 terminal command line.

Select the F-4 key to prompt the CRTDEVPRT command. Enter the following parameters:

Device Description: Xeroxprinter

Device Class: *lan

Device Type: 3812

Содержание WORKCENTRE 5735











































































































































































































































































































































































Результаты поиска

Содержание WORKCENTRE 5735

Отзывы:

Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 130 / 362

Результаты поиска

Содержание WORKCENTRE 5735

Отзывы: