Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 323

Страница: 323 / 362

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

323

Check that the device you want to clone settings to supports XSA

At your Workstation:

Note:

To configure this feature or these settings access the

Properties

tab as a System

Administrator. For details, refer to

Access Internet Services as System Administrator

on page 24.

From the

Properties

tab, click on the

[General Setup]

link.

Select

[Cloning]

in the directory tree.

From the display of available check boxes, verify that

Accounting

is among them.

Then select

[Configuration]

in the directory tree, and verify that both devices have the same

System Software Version.
The System Software Version is located in the

Printer Setup

area.

To make a Back-up file

From the

Properties

tab, select

[Cloning]

in the directory tree.

From the display of available groups, select the settings that you wish to clone. To clone all
features, click on the

[Clone]

button, or to customize the configuration file disable any of the

features by clicking the checkboxes next to the feature(s) and then click on the

[Clone]

button.

Right-click on the

[Cloning.dlm]

link that appears and select

[Save Target As]

A dialog box will prompt you to specify the name and location for the cloned file. Ensure the
extension reads

.dlm

Click on the

[Save]

button. The .dlm file can now be used to restore the information to the same

device or to clone other devices.

To Restore Settings or Clone Settings to Another Device

Note:

This procedure will cause the device to reboot and be unavailable over the network for

several minutes.

From the

Properties

tab, select

[Cloning]

in the directory tree.

In the

[Install Clone File]

area, click on the

[Browse]

button.

Locate the

[Cloning.dlm]

clone file and click on

[Open]

Click on the

[Install]

button.

The device will be unavailable over the network for several minutes. When rebooted a
Configuration Report will print, if enabled.

The XSA settings and data will be restored as they were when the back-up file was created. If you
are cloning another device you may want to change, delete or reset the XSA accounts as
appropriate for the new device.

Содержание WORKCENTRE 5735











































































































































































































































































































































































Результаты поиска

Содержание WORKCENTRE 5735

Отзывы:

Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 323 / 362

Результаты поиска

Содержание WORKCENTRE 5735

Отзывы: