Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 71

Страница: 71 / 362

Windows 2000/2003/XP/Vista Environment

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

Touch

[Subnet and Gateway]

, the

Subnet and Gateway

screen displays.

For

IP Gateway

, touch each octet under the title and enter IP Gateway address using the

numerical keypad.

Repeat this process for the

Subnet Mask

. When you are finished, touch

[Save]

to accept the

changes and return to the

TCP/IP Settings

screen.

Touch

[Close]

to return to the

TCP/IP

screen.

Touch

[HTTP/IPP Enablement]

, the

HTTP/IPP Enablement

screen displays.

For

Protocol

, ensure

Enable

is selected. If not, touch

[Enable]

Touch

[Save]

, then touch

[Close]

to return to the

Tools

pathway.

10. Touch

[TCP/IP-Line Printer]

, the

TCP/IP - Line Printer

screen displays.

Touch

[Enable]

, to enable the option.

If you wish to change the LPR port for your device, touch the port number area and enter the
desired port number using the numerical keypad.

Note:

You can change the port number at which your device will accept LPR print jobs. It is

recommended that you do this ONLY with extreme caution as most LPR spoolers are set to send
print jobs to the default port of 515.

Touch

[Save]

to return to the

TCP/IP

screen.

Touch

[Close]

to return to the

Tools

pathway.

For Dynamic IP Address

Installation via DHCP (Dynamic Host Configuration Protocol)

DHCP is enabled on the device by default. If the device is connected to the network the TCP/IP
information will be configured when the device is powered on and no further configuration is required.

Note:

To configure this feature or these settings access the

Tools

pathway as a System

Administrator. For details, refer to

Access Tools Pathway as a System Administrator

on page 18.

From the

Tools

pathway, touch

[Network Settings]

Touch

[Network Setup]

Touch

[TCP IP]

Touch

[TCP/IP Settings]

Note:

All options under the

IP Address/Host Name

section will be grayed out until DHCP is

deselected in the Dynamic Addressing section. Follow the next step to disable DHCP and access
these options if required.

Touch

[Automatic Addressing]

, by default, DHCP will be selected. Select the required dynamic

addressing method

[BOOTP]

[DHCP]

, or

[RARP]

Note:

To give the device a static IP Address, touch

[Disabled]

to disable Automatic Addressing.

Touch

[Enabled]

Touch

[Save]

Touch

[HTTP/IP Enablement]

, the

HTTP/IP Enablement

screen displays.

For

Protocol

, ensure

Enable

is selected. If not, touch

[Enable]

Содержание WORKCENTRE 5735











































































































































































































































































































































































Результаты поиска

Содержание WORKCENTRE 5735

Отзывы:

Похожие инструкции для WORKCENTRE 5735

Бренды по названию

Популярные бренды

Xerox WORKCENTRE 5735, Руководство системного администратора

Результаты поиска

Содержание WORKCENTRE 5735

Отзывы:

Похожие инструкции для WORKCENTRE 5735

Бренды по названию

Популярные бренды