Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 26

Страница: 26 / 362

Internet Services

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

Click on the

[Protocols]

link.

Note:

To see IPv6 Addressing parameters, if desired, click

[IP (Internet Protocol)]

in the list of

Protocols, then click on

[IPv6]

tab.

Select your individual protocol of interest from the displayed list and modify settings to your
requirements. For further information refer to

Network Installation

on page 69.

Set a Description for the Device

The

Internet Services Properties Description

page contains information that identifies a specific

device model, name and physical location.

Note:

To configure this feature or these settings access the

Properties

tab as a System

Administrator. For details, refer to

Access Internet Services as System Administrator

on page 24.

From the

Properties

tab, select

[Description]

in the directory tree.

In the

Identification

area:

Type a name of your choice for the device in the

[Device Name]

field.

Type the site location for the device in the

[Location]

field.

Click on the

[Apply]

button to accept the changes or

[Undo]

to return the settings to their

previous values.

To Enable Services

Services are pre-installed on the device, and must be enabled from the

Optional Services

screen within

the device

Tools

pathway.

The Optional Services are:

At the Device:

Note:

To configure this feature or these settings access the

Tools

pathway as a System

Administrator. For details, refer to

Access Tools Pathway as a System Administrator

on page 18.

From the

Tools

pathway, touch

[Service Settings]

Use the

and

Down

scroll button and touch

[Optional Services]

Note:

If you do not see the required service, you may need to install additional hardware on your

device.

• ID Card Copy

• Immediate Image Overwrite

• Workflow Scanning

• Server Fax

• E-mail

• Embedded Fax

• Internet Fax

• Save Job For Reprint

• Image Overwrite Security

• Searchable File Formats

• Network Accounting

• Smart Card

• Color Scanner Enablement

Содержание WORKCENTRE 5735











































































































































































































































































































































































Результаты поиска

Содержание WORKCENTRE 5735

Отзывы:

Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 26 / 362

Результаты поиска

Содержание WORKCENTRE 5735

Отзывы: