manualshive.com logo in svg

Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 349 / 362

Поделиться
Скачать
Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 349

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

349

Troubleshooting: Internet Fax

If you are experiencing problems with sending an Internet Fax, first verify that the device is connected 
on the network and functioning as a printer by performing the following activities:

•

Check the network cable at the back of the device.

•

Send a test page from your PC to the device.

•

If connected via TCP/IP try a PING from your workstation to the device.

Configure your device on the network or resolve any networking issues before attempting to use the 
Internet Fax feature. For Instruction to configure the device on the network, see 

Enable TCP/IP and 

HTTP at the Device 

on page 19.

Ensure Internet Fax is installed properly on the device.

At the device, verify that you have an Internet Fax feature icon on the device screen interface and that 
this is not grayed out and unavailable.

To view the Internet Fax feature icon, you may need to press the 

<Services Home>

 button.

Install Internet Fax before proceeding. For instructions, refer to 

Internet Fax 

on page 261.

Note:

If you have enabled Internet Fax but the icon is grayed out or unavailable.

To enable this feature, access the 

Tools

 pathway as a System Administrator. For details, refer to 

Access Tools Pathway as a System Administrator 

on page 18. From the 

Tools

 pathway:

•

Touch 

[Service Settings]

, touch 

[Optional Services]

.

•

Touch 

[Internet Fax]

. 

•

The 

Internet Fax Service

 screen displays. Select 

[Enable]

, and touch 

[Save]

. 

Verify that the Internet Fax settings have been correctly configured on the device by printing a 
Configuration Report.

At the Device:

1.

Press the 

<Machine Status>

 button.

2.

Touch the 

[Machine Information]

 tab.

3.

Touch 

[Print Reports]

.

4.

Touch 

[Print Report]

.

5.

Touch 

[Close]

.

The Configuration Report will print. On the report, view the 

Network Setup 

details. Verify that the 

SMTP Server Address is correct and that the TCP/IP Domain Name, Host Name and DNS settings are 
properly configured. Verify the POP3 Server Address is correct.

Are the Internet Fax Settings Correctly Configured?

For instructions, refer to 

Internet Fax 

on page 261.

Содержание WORKCENTRE 5735











































































































































































































































































































































































Отзывы:

Нет отзывов