background image

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

204

Authenticated User and Domain

 - select this method if the user name and domain are 

to be authenticated via LDAP. 

Authenticated User

 - select this method if just the user name is to be authenticated via 

LDAP. 

Prompt at User Interface

 - select this method to have each user enter authentication 

credentials at the printer's control panel.

System

 - select this method if the credentials are going to be typed in on this page and 

stored in the device's memory

If you select 

System

, enter details in the 

[Login Name]

 and 

[Password]

.

Enter the password again in the 

[Retype password]

 field.

Check  the 

[Select to Save New Password]

 checkbox, if you need to change the 

password for an existing Login Name.

g.

Click on the 

[Save] 

button to accept the changes.

The Next Step is to proceed to the General Settings. Refer to 

Configure General Settings 

on page 209.

NetWare NCP (NetWare Core Protocol)

Information Checklist

Before starting the procedure, ensure the following items are available or tasks have been performed:

Ensure the device is fully functioning on the network prior to installation.

Ensure NetWare protocol is enabled on your device.

Print a Configuration Report to verify that NetWare protocol is enabled on your device.

a.

Press the 

<Machine Status>

 button.

b.

Touch the 

[Machine Information]

 tab.

c.

Touch 

[Print Reports]

.

d.

Touch 

[Print Report]

.

e.

Touch 

[Close]

.

The Configuration Report will print. On the report under the 

Network Setup

 if 

NetWare

 is 

enabled.

For instructions on how to enable NetWare, refer to 

NetWare 

on page 127.

Designate or create a new directory on the NetWare server to be used as the scan filing location 
(repository). Note the server name, server volume, directory path, the NDS Context and Tree, if 
applicable.

Create a user account and password with access to the scan directory. When a document is 
scanned the device logs in using the account, transfers the file to the server and then logs out. 
Note the user account and password.

Test your settings by logging in to the scan directory from a PC with the user account and 
password. Create a new folder within the directory and then delete the folder. If you cannot 
perform this function check the user account access rights.

Содержание WORKCENTRE 5735











































































































































































































































































































































































Отзывы: