manualshive.com logo in svg

Xerox WORKCENTRE 5735, Руководство системного администратора, Страница: 351 / 362

Поделиться
Скачать
Xerox WORKCENTRE 5735 Скачать руководство пользователя страница 351

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

351

working correctly. By successfully sending e-mail to a mail server not subject to authentication, the 
possibility of a malfunctioning client can be eliminated.

If the fault requires further investigation, refer to the Xerox website at www.xerox.com for further 
support.

Troubleshooting: Server Fax

If you are experiencing problems with sending a Server Fax, first verify the device is connected on the 
network and functioning as a printer by performing the following activities:

•

Check the network cable at the back of the device.

•

Send a test page from your PC to the device.

•

If connected via TCP/IP try a PING from your workstation to the device.

Is the Device Functioning on the Network as a Printer?

Configure your device on the network or resolve any networking issues before attempting to use the 
Server Fax feature. For instructions to configure the device on the network, see 

Enable TCP/IP and HTTP 

at the Device 

on page 19.

Ensure Server Fax is Installed Correctly

At the device, verify that you have a Server Fax feature icon on the device screen interface and that this 
is not grayed out and unselectable.

To view the Server Fax feature icon, you may need to press the 

<Services Home>

 button.

Is the Fax Button Available on the Device?

Install Server Fax before proceeding. For instructions, refer to 

Server Fax 

on page 289.

Note:

If you have enabled Server Fax, but the icon is grayed out or the service is unavailable.

To enable this feature, access the 

Tools

 pathway as a System Administrator. For details, refer to 

Access Tools Pathway as a System Administrator 

on page 18. From the 

Tools

 pathway:

•

Touch 

[Service Settings]

, touch 

[Optional Services]

.

•

Touch 

[Server Fax]

. 

•

The 

Server Fax Service

 screen displays. Select 

[Enable]

, and touch 

[Save]

. 

Verify that the Server Fax settings Have Been Properly Configured on the Device by Printing a 
Configuration Report.

At the Device:

1.

Press the 

<Machine Status>

 button.

2.

Touch the 

[Machine Information]

 tab.

3.

Touch 

[Print Reports]

.

4.

Touch 

[Print Report]

.

5.

Touch 

[Close]

.

Содержание WORKCENTRE 5735











































































































































































































































































































































































Отзывы:

Нет отзывов