OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
OS1977
FCG exiting: Failure to connect to the IOT.
The FCG utility is unable to communicate with the printer. The
system might be processing another print job or task.
Action
1. Retry the FCG command.
2. If the message reappears, look for other system or printer
messages to explain the condition.
3. If no other explanatory messages appear, contact your
service representative.
OS1978
FCG exiting: Data value is out of range.
or
FCG exiting: Parameter x is out of range.
The FCG utility was verifying that all data values and parameters
specified in your command are within allowable range before it
updates the nonvolatile memory (NVM) of the printer. FCG
encountered at least one value or parameter that is out of range.
Action
None.
OS1979
NVM Address n n : n
The system is listing the current values for the address of the
nonvolatile memory (NVM).
Action
None.
OS1980
Performing print quality adjustment
The message indicates the system has started to adjust print
quality.
Action
None.
OS1981
Print quality adjustment has been completed
The message indicates the system completed print quality
adjustment successfully.
Action
None.
OS1990
Pre-format form - using system default paper size
The header of the specified form file lacks the edge mark
information the system needs to determine paper size. The
system is using the default paper size for the job.
Action
None.
OS1991
No test patterns form available for specified source size
The system does not have a test pattern form file available for
the paper size you requested.
Action
Select a different paper size and retry the command, or abort the
operation.
9-40
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
