Xerox 4850 HighLight Color Скачать руководство пользователя страница 178

Страница: 178 / 280

JOB SOURCE LIBRARY COMPILATION (PDL) MESSAGES

PD7500

Print file full

Output listing work file exceeds space allocation.

Action

Reduce the size of the JSL.

PD7550

Unexpected file overflow encountered during I/O

A large enough file was not created to allow complete transfer
from disk during input or output.

Action

1. Recompile the JSL.
2. If the problem continues, contact your service representative.

PD7600

RTEXT file overflow

The Routing Text file has too many entries for the allotted system
disk space.

Action

Reduce the number of entries.

PD8200

Internal error in PDL

PD8210

Internal error in PDL

An unspecified software error has occurred. The JDL will not
compile.

Action

1. Recompile the JSL.
2. If the problem continues, contact your service representative.

PD8550

I/O error, processing SEF mapping file

An I/O error occurred while processing the Short Edge Feed font
mapping file.

Action

Recompile the JSL that generated the requested mapping file and
retry the operation.

PD8800

Insufficient dynamic memory, try rebooting system

There is not enough core memory remaining for the command
you entered, and the compiling process will abort.

Action

1. Press the Boot button and enter B to reboot the system.
2. Recompile the JDL.
3. If the message reappears, contact your service representative.

10-4

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Содержание 4850 HighLight Color

























































































































































































































































































Результаты поиска

Содержание 4850 HighLight Color

Отзывы:

Xerox 4850 HighLight Color, Руководство по эксплуатации, Страница: 178 / 280

Результаты поиска

Содержание 4850 HighLight Color

Отзывы: