GENERAL FLOPPY UTILITY (FLF) MESSAGES
FL2105
This floppy is formatted at the wrong density
Would you like to reformat? (Y/N)
The system detected an error during the formatting process, and
you are requested to reformat another floppy disk.
Action
Perform one of the following actions:
•
Enter Y to reformat the floppy disk.
•
Enter N to cancel the operation.
FL2110
Insert a new floppy
You are requested to insert another floppy disk in the drive.
Action
Insert the floppy disk in the drive.
FL2115
Error in writing floppy, please insert a new floppy
The system detected an error in copying files to the floppy disk.
Action
Use another floppy disk.
FL2250
Please unload unusable floppy
You are requested to remove the floppy disk from the drive.
Action
Remove the floppy disk from the drive.
FL2310
File size exceeds floppy capacity
The file is too large for the system to store it on the floppy disk.
Action
Replace the floppy disk in the drive with one that has more
available storage space, or divide the file into smaller files and
retry the operation.
FL2500
Must exit to print
The print file for the System Software Set was queued, but you
must unload the floppy utility from the system before the job can
be printed.
Action
If you are working in the multiple command mode, enter the
END command. If you are working in the single command
mode, no action is required.
FL2520
Do you wish to change the diskette label? (Y/N)
You are requested to decide if you want to change the floppy
disk name from its current label.
Action
Perform one of the following actions:
•
Enter Y to change the floppy disk label.
•
Enter N to cancel the operation.
5-8
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE