OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
OS1215
INPUT stopped after orderly shutdown.
A software failure caused a system rollover. The system stopped
inputting data while it attempted to recover all data and
reestablish the operating mode at the time of failure.
Action
Follow the instructions appearing on the system controller display
to start recovering the job and to abort the analysis dump.
OS1230
SEPARATE not permitted with destination configuration
You entered a SEPARATE ON or SEPARATE OFF command when a
two-tray stacker was not present.
Action
None.
OS1235
CLP commands not allowed while printing.
You entered a CLP command. The printer cannot process CLP
commands while active.
Action
None.
OS1240
Status command inoperative
You pressed <JOB STATUS> or entered the JOBS command.
The system is unable to display status because insufficient disk
space existed to create a file during sysgen.
Action
1. Delete files to create more disk space.
2. Compress the disk.
3. Enter the SFS CREATE command to create a status file.
OS1245
STAFIL.SYS initialization failure, status inoperative
You entered the SFS CREATE command. The system is unable to
process the command because insufficient disk space existed to
create a file during sysgen.
Action
1. Delete files to create more disk space.
2. Compress the disk.
3. Enter the SFS CREATE command to create a status file.
OS1250
Accounting enabled
The system reinstated a disabled accounting function.
Action
None.
OS1255
Accounting disabled
The system is restricting the accounting function and cannot
process the ACCOUNT or REPORT command that was entered.
Action
Obtain the correct password and log on at the correct level.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
9-17
